Soap Powder Moisture
Increasing Profits Through Moisture
Maintaining optimal moisture levels during the production of soap powder is critical to achieving the highest quality product. When the moisture content becomes too high or too low, product quality becomes inferior and waste occurs. To accurately test and regulate moisture in your product, you need a top quality soap powder moisture analyzer—but finding one with the best capabilities is difficult when so many are available on the market.
Because we understand your company’s need to cut production costs without compromising on product quality, we’ve made the IR-3000 as efficient as possible. Not only will you see a major increase in the quality of your soap powder, but the IR-3000 will reduce start-up and down times, as well as eliminate waste due to incorrect moisture levels.
- Increased Plant Efficiency
- Consistent, Quality Product
- Instant ROI = Energy Savings, Lowered Water Usage, Increased Productivity
- 100% Product Inspection
Calculate Potential ROI
To accurately measure the detergent moisture levels, the sensor should be installed over the conveyor transporting the detergent. The sensor should be mounted several inches above the belt, screw conveyor or any area where the material can be viewed.
PERFORMANCE
Unsurpassed in performance, our sensors can accurately measure moisture within tenths of a percent of most applications
STABILITY
MoistTech sensors withstand the test of time and are low to zero maintenance
RELIABILITY
Rely on MoistTech’s NIR moisture sensors to never drift or need re-calibration
COST OF OWNERSHIP
A moisture measurement system is essential for the production process and in some cases will pay for itself in less than 30 days
Installing the Ultimate Solution
For over forty years, MoistTech has been researching moisture and its applications in production industries. We want our instruments to be the latest in moisture testing technology, which is why we’re always discussing with our industry partners about how we can improve our products and better meet their needs. Their feedback, combined with our decades of experience, is exactly what has gone into developing the MoistTech IR-3000.
The IR-3000 is a moisture sensor with only the best capabilities. It takes instant, non-contact measurements of moisture in % dry and % wet, as well as accurate reading of temperature, chemical composition, and other measurements vital to soap powders. The IR-3000 allows you to regulate moisture either automatically or manually.
Assess
Locate the point in the production process in which measuring moisture will be the most crucial and beneficial. Identify how you will use the moisture measurement data for improvements and if it will tie into your PLC.
Remember this could involve more than one installation point!
Develop
A closed loop process is achieved by incorporating a moisture measurement system into the manufacturing process. Developing a proactive solution to moisture control will avoid costly downfalls.
Support
MoistTech’s experts will assess your specific application with lab tests, calibrations and accuracy results to ensure our equipment will peform for you. All of our sensors are pre-calibrated prior to being shipped to create a plug-and-play operation for the end-user.
Contact
We offer service and support throughout the world for our moisture measurement sensors and would be happy to connect you with a rep in your area. Contact us today for more information!
Understand the Process
Using the IR-3000 drastically cuts production costs. It is energy efficient, low maintenance, and decreases startup and down times. Over dried product causes waste; so does product that is too moist. With the IR-3000, these problems will no longer be an issue.
Using the IR-3000, you’ll save money throughout the entire production process, while making the best quality product at the same time. With MoistTech, you don’t need to compromise.